bss169 sipmos ? small-signal-transistor features ? n-channel ? depletion mode ? d v /d t rated ? available with v gs(th) indicator on reel ? pb-free lead-plating; rohs compliant maximum ratings, at t j =25 c, unless otherwise specified parameter symbol conditions unit continuous drain current i d t a =25 c 0.17 a t a =70 c 0.14 pulsed drain current i d,pulse t a =25 c 0.68 reverse diode d v /d t d v /d t i d =0.17 a, v ds =80 v, d i /d t =200 a/s, t j,max =150 c 6 kv/s gate source voltage v gs 20 v esd sensitivity (hbm) as per mil-std 883 class 1 power dissipation p tot t a =25 c 0.36 w operating and storage temperature t j , t stg -55 ... 150 c iec climatic category; din iec 68-1 55/150/56 1) see table on next page and diagram 11 value v ds 100 v r ds(on),max 12 ? i dss,min 0.09 a product summary pg-sot-23 type package pb-free tape and reel information marking bss169 pg-sot-23 yes l6327: 3000 pcs/reel sfs bss169 pg-sot-23 yes l6906: 3000 pcs/reel sorted in v gs(th) bands 1) sfs rev. 1.3 page 1 2007-02-07
bss169 parameter symbol conditions unit min. typ. max. thermal characteristics thermal resistance, junction - ambient r thja minimal footprint - - 350 k/w electrical characteristics, at t j =25 c, unless otherwise specified static characteristics drain-source breakdown voltage v (br)dss v gs =-10 v, i d =250 a 100 - - v gate threshold voltage v gs(th) v ds =3 v, i d =50 a -2.9 -2.2 -1.8 drain-source cutoff current i d(off) v ds =100 v, v gs =-10 v, t j =25 c - - 0.1 a v ds =100 v, v gs =-10 v, t j =125 c --10 gate-source leakage current i gss v gs =20 v, v ds =0 v - - 10 na on-state drain current i dss v gs =0 v, v ds =10 v 90 - - ma drain-source on-state resistance r ds(on) v gs =0 v, i d =0.05 a - 5.3 12 : v gs =10 v, i d =0.17 a - 2.9 6 transconductance g fs | v ds |>2| i d | r ds(on)max , i d =0.14 a 0.10 0.19 - s threshold voltage v gs(th) sorted in bands 2) j v gs(th) v ds =3 v, i d =50 a -2 - -1.8 v k -2.15 - -1.95 l -2.3 - -2.1 m -2.45 - -2.25 n -2.6 - -2.4 2) each reel contains transistors out of one band whose identifying letter is printed on the reel label. a specific band cannot be ordered separately. values rev. 1.3 page 2 2007-02-07
bss169 parameter symbol conditions unit min. typ. max. d y namic characteristics input capacitance c iss -5168pf output capacitance c oss -913 reverse transfer capacitance c rss -47 turn-on delay time t d(on) - 2.9 4.2 ns rise time t r - 2.7 4.0 turn-off delay time t d(off) -1117 fall time t f -2740 gate charge characteristics gate to source charge q gs - 0.12 0.16 nc gate to drain charge q gd - 0.9 1.4 gate charge total q g - 2.1 2.8 gate plateau voltage v plateau - -0.43 - v reverse diode diode continous forward current i s - - 0.17 a diode pulse current i s,pulse - - 0.68 diode forward voltage v sd v gs =-10 v, i f =0.17 a, t j =25 c - 0.79 1.2 v reverse recovery time t rr - 20.5 25.6 ns reverse recovery charge q rr - 9.7 12.1 nc v r =50 v, i f =0.12 a, d i f /d t =100 a/s t a =25 c values v gs =-10 v, v ds =25 v, f =1 mhz v dd =50 v, v gs =-3?7 v, i d =0.12 a, r g =6 : v dd =80 v, i d =0.12 a, v gs =-3 to 7 v rev. 1.3 page 3 2007-02-07
bss169 1 power dissipation 2 drain current p tot =f( t a ) i d =f( t a ); v gs
bss169 5 typ. output characteristics 6 typ. drain-source on resistance i d =f( v ds ); t j =25 c r ds(on) =f( i d ); t j =25 c parameter: v gs parameter: v gs 7 typ. transfer characteristics 8 typ. forward transconductance i d =f( v gs ); | v ds |>2| i d | r ds(on)max g fs =f( i d ); t j =25 c -0.2 v -0.1 v 0 v 0.1 v 0.2 v 0.5 v 1 v 10 v 0 2 4 6 8 10 12 14 0 0.1 0.2 0.3 0.4 0.5 i d [a] r ds(on) [ : ] 0 0.1 0.2 0.3 0.4 0.5 -2 -1 0 1 2 v gs [v] i d [a] 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.00 0.10 0.20 0.30 0.40 0.50 i d [a] g fs [s] -0.2 v -0.1 v 0 v 0.1 v 0.2 v 0.5 v 1 v 10 v 0 0.1 0.2 0.3 0.4 0.5 0246810 v ds [v] i d [a] rev. 1.3 page 5 2007-02-07
bss169 9 drain-source on-state resistance 10 typ. gate threshold voltage r ds(on) =f( t j ); i d =0.05 a; v gs =0 v v gs(th) =f( t j ); v ds =3 v; i d =50 a parameter: i d 11 threshold voltage bands 12 typ. capacitances i d =f( v gs ); v ds =3 v; t j =25 c c =f( v ds ); v gs =-10 v; f =1 mhz 50 a j k l m n 0.01 0.1 1 10 -3 -2.5 -2 -1.5 -1 v gs [v] i d [ma] typ 98 % 0 4 8 12 16 20 24 -60 -20 20 60 100 140 180 t j [c] r ds(on) [ ?
bss169 13 forward characteristics of reverse diode 15 typ. gate charge i f =f( v sd ) v gs =f( q gate ); i d =0.12 a pulsed parameter: t j parameter: v dd 16 drain-source breakdown voltage v br(dss) =f( t j ); i d =250 a 80 100 120 -60 -20 20 60 100 140 180 t j [c] v br(dss) [v] 0.2 vds(max) 0.5 vds(max) 0.8 vds(max) -4 -2 0 2 4 6 8 0 0.5 1 1.5 2 2.5 q gate [nc] v gs [v] 25 c 150 c 25 c, 98% 150 c, 98% 10 0 10 -1 10 -2 10 -3 10 -4 0 0.5 1 1.5 v sd [v] i f [a] rev. 1.3 page 7 2007-02-07
bss169 packa g e outline: footprint: packaging: dimensions in mm rev. 1.3 page 8 2007-02-07
bss169 published by infineon technologies ag bereich kommunikation st.-martin-stra?e 53 d-81541 mnchen ? infineon technologies ag 1999 all rights reserved. attention please! the information herein is given to describe certain components and shall not be considered as warranted characteristics. terms of delivery and rights to technical change reserved. we hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. infineon technologies is an approved cecc manufacturer. information for further information on technology, delivery terms and conditions and prices, please contact your nearest infineon technologies office in germany or our infineon technologies representatives worldwide (see address list). warnings due to technical requirements, components may contain dangerous substances. for information on the types in question, please contact your nearest infineon technologies office. infineon technologies' components may only be used in life-support devices or systems with the expressed written approval of infineon technologies if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered. rev. 1.3 page 9 2007-02-07
|
